Screw clamp

The screw clamp (with handle) is a component that compresses the workpiece on the three-dimensional welding platform or basic components so that the workpiece will not be displaced during processing. There are three types: 45°, 90° and 180°.

The clamp is a component that presses the workpiece on the platform or basic component so that the workpiece will not be displaced during processing.

►Used for pressing after fixing the workpiece, it can be inserted into any hole, adjust the position and lock the position through the slider on the pipe fitting;

►It can be divided into handle type and handleless type. The indenter is a movable hemispherical mechanism that can achieve 360° floating;

►The indenter adapts to the needs of workpieces at any angle and is removable and replaceable. The handle is rubber;

►The pressing parts are available in telescopic and non-stretchable types. The telescopic ones are used when the pressing distance is long, and the non-stretchable ones are used when the pressing distance is short.

►The adjustment strokes of T-type screw are D16-40mm/D22-50mm/D28-60mm;

►The pipe fittings are rigid and flexible, preventing the trouble of being difficult to remove the welded parts after deformation.